VERDIGRIS PATINA

Specifications: 99.9% Copper
A semi-reflective finish that is achieved through a chemical immersion process which accelerates the natural aging process of the metal. When the coloration process is completed a protective clear coat is applied to seal in the finish.  

•POLISHED
Specifications: 99.9% Copper
A reflective finish that requires a protective clear-coating. We do not recommend using copper outdoors.  

•

 

SATIN
Specifications: 99.9% Copper
A semi-reflective finish with a hairline running through it. It does require a protective clear coat. We do not recommend using copper outdoors.  

•

 

NON DIRECTIONAL
Specifications: 99.9% Copper
All standard sanding grits available. Depending on the sanding grit specified this finish can be reflective or semi-reflective.  

•

 

BEAD BLASTED COPPER
Specifications: 99.9% Copper
semi-reflective finish achieved through blasting glass beads against the surface.  

 

•

 

WARRANTY
A.D.Design guarantees the construction of our products for the life of the sign.  This warranty covers the cost of repair or replacement of defective pieces, plus shipping costs. We reserve the right to decide whether to replace or repair the product in question. Our warranty does not include costs for de-installation, re-Installation or other associated expenses. Although our brass and copper products receive a protective clear-coat, we do not guarantee the finish on brass or copper when used in an outdoor environment. For oxidized brass and copper, we cannot guarantee consistency of color over a large surface or from letter to letter. 

•Thank you for your interest in our products. Please contact our customer service department if you have any questions.  

•

Note: To clean brass or copper, use clean water; always use a soft cloth. Cleaning with abrasives or chemical materials will damage the clear-coat and allow oxidation to occur.